spiderchipfix ver 1.1

[a00sambe]

skall tydligen fungera 100 %. Bilden visar vilken pogo (gnd/jord) man skall ta bort.

[kletost]

och en liten förklaring om man inte orkar läsa själv på spiders hemsida:


As previously announced the SpiderChip v1.1 met a installation problem.
All pogo pins do not touch correctly the motherboard of the Xbox, causing the chip inability to boot.
The screw and the ring delivered with the chip are the main cause of this problem.
They are not of the proper size and therefore do not allow a good alignment of the pogo pins.

The pogo pin 'GND' (please refer to the picture), linked to the problem of the screw,
prevents some other pogo pins to fit in correctly.
This Pin is a 'security' pogo pin. In fact, it is not used for this
Xbox version and it only is here to ensure the compatibility with future versions of Xbox.

One easy and efficient way to install the SpiderChip with perfect result is to remove
the bottom of the GND pogo pin (please refer to the picture for more details).
Once this is done, we suggest you to use a 9mm long screw in conjunction with a 2mm thick ring.
The installation will be flawless!

[gif_lintan]

Jag har det här problemet men jag behöver ha reda på vilken som är den där GND-pinnen som man kan ta bort och hur jag ska gå tillväga. Skulle vara kanon om någon har bilden som fanns på gamla spider********* eller nåt liknande.