CPU Key and NAND

[jay20]

Hi, I had my xbox360 jtag hacked by you guys and I need to know where my CPU key and NAND file resides on the box. Could you tell me the location cheers.

[anden1]

You may boot into Xell / Xellous by pressing the eject button to start the machine when it's powered off. Make sure you leave the tray open until you see Xell (it's a blue screen with lots of text on it) if you are using HDMI you will not see this, as Xell doesn't support HDMI. Use any other cable instead if you do.

From Xell you will see your CPU key and you have the ability to connect to your Xbox via LAN with the IP address you are given by Xell. From there you can also get the CPU key, and even dump your current NAND.

If you want the original NAND dump from before the JTAG hack, you probably have to request it. (I do not work at PSXCare so I can't help you there).

[Swizzy]

This guide: http://forum.psxcare.com/support/sho...-till-FREEboot will tell you how to get your current nand dumped as well as your CPUKey altought it is in swedish you may get it translated throught google translate or something like that

If you need your original nand dump you can request it from us, all you need then is a USB Memory of any kind and your consoles serial number stop by the shop and we'll give you your nand dump, the CPUKey however we probably don't have saved digitally, if you see a handwritten line with a series of "random" characters between 0 and F on the note which was left on your machine you allready have your cpukey

[jay20]

Hey Swizzy thanks for the info, could you not maybe email me the nand if I give you the serial number of the console?

Also when you guys did the jtag did you remove r6t3 resistor?

[Swizzy]

Send an e-mail to this adress: psxcare@netcare.se and request a backup of your nand and i'll send it to you, you could also try to get your CPUKey and send to us and i'll also include a Freeboot 12611 for you to flash your 360 with =)

Yes, vi remove R6T3 to prevent our customers from destroying their consoles due to updating by accident

[jay20]

Thanks thats awseome, I want to install the 12611 dash Ill send it over shortly. Just need to get my CPU key

[Swizzy]

You'll get your new nand tomorrow morning along with your original dump, since i'm at home now and don't have access to the computer with the nand dumps

[jay20]

Thats fine, Im in no rush currently. I can wait till tomorrow

[jay20]

One question when you include the Freeboot 12611 I presume it will have all the dash files also, so once flashed it will boot into the new dash?

[Swizzy]

One question when you include the Freeboot 12611 I presume it will have all the dash files also, so once flashed it will boot into the new dash?

Yes, it will boot straight into 12611 dash, which supports Kinect

[linuxares]

Hi!

If you want, you can try today. Since PSXCare have your original dump and if you might f-up your 360, you can still fix it.

What I know, you can use Flash360, dump your nand (do it like 3 times and compare them so they are 100% identical), turn off your 360. Press "Eject" on the DVD and it will start Xell (or Xellous) and notice the IP or take a picture with a digitalcamera on your tv screen. Notice, that you HAVE TO USE your componentcable and NOT the HDMI. Since Xell/Xellous have no support for HDMI (I'm not 100% sure about Xellous but Xell won't support HDMI).

Then you can use a softare called "Easy Freeboot" and create a image you need for the new Kinect dashboard.

[Swizzy]

Then you can use a softare called "Easy Freeboot" and create a image you need for the new Kinect dashboard.

DO NOT USE easy freeboot! use this program instead: http://www.bestpig.fr/files/freeBOOT..._Maker25r2.exe

Easy Freeboot is buggy!

[jay20]

I will wait for Swizzy to do it, Im in no rush right now

[jay20]

Oops flashed the nand and now the xbox boots into Xell all the time I did make a backup of the NAND before I did the flash. I used flash360.

So the question is, what do I do now

[jay20]

Is there a way to run the flashing from Xell and the USB stick?