Undvika live osv

[Todilo]

Hej, först vill jag tacka för snabb leverans! Mums, sitter redan och har roligt.

Tänkte bara höra om det är något man borde tänka på med nya lådan? T.ex. live kopplingen, jag förstår att man absolut inte skall koppla upp sig mot live men finns det någon risk att detta "råkar" hända. Självklart försöker jag inte skapa något live-konto men vill bara vara säker så man inte måste lägga till och blocka några servrar eller liknande?

Sitter och för över spel via Content manager som jag tycker fungerar väldigt bra, finns det några andra "måste" program, har ISO2God också. Kan någon av prorgammer sköta även TU's så att man för över rätt version? Jag har sett att freestyle dash hämtar hem TU's men vet inte om de hittar alla? Om inte vill jag vara säker på att det inte blir till fel version.

Är det fortfarande så att livespel måste ligga på hårddisken, men GOD eller uppackade spel kan ligga på extern disk. Förhoppningsvis fyller jag inte ut 250gb men man vet aldrig.

Igen stort tack, kunde inte fått en bättre tisdag!!

Edit: Nu har jag inte googlat ännu men något smart sätt att starta freestyle dash från XeX ? Lite segt att behöva gå från original dash-> xex-> till filträdet -> och starta freestyle dash varje gång man byter spel.

Edit2: Quickboot, Dashlaunch. Vad är bäst?

[Swizzy]

Vi har redan aktiverat en spärr som gör att konsollen inte kan kommunicera med Xbox Live servrarna och den ser inte uppdateringar heller (från t.ex. spel) detta görs med Dashlaunch som är för installerat

FSD hämtar dom TU's som finns på marketplace.jqe360.com det finns även på www.xbuc.com som inte alltid finns på jqe360, samma åt andra hållet... FSD laddar hem rätt versioner åt dig, så det är väl det bästa att använda för TU's

Vad menar du med "Live spel"? XBLA? dom BÖR ligga på interna hårddisken, men kan likväl ligga på extern hårddisk i dom flesta fallen, DLC är det ända som verkligen MÅSTE ligga på interna hårddisken då spelen letar efter dom filerna där

Håll in Y knappen så startar den automatiskt FSD, du kan även göra en Quickboot länk till det alternativt lägga det som autostart i launch.ini (som du då lägger på hdd1, det ligger en i flash, du kan kopiera ut den men INTE skriva dit)


Liten info: Quickboot och Dashlaunch är inte i närheten samma sak, Dashlaunch har mycket fler funktioner än Quickboot, Quickboot är bara till för att göra länkar till program du kan ha i dashboarden

[Todilo]

Vi har redan aktiverat en spärr som gör att konsollen inte kan kommunicera med Xbox Live servrarna och den ser inte uppdateringar heller (från t.ex. spel) detta görs med Dashlaunch som är för installerat

FSD hämtar dom TU's som finns på marketplace.jqe360.com det finns även på www.xbuc.com som inte alltid finns på jqe360, samma åt andra hållet... FSD laddar hem rätt versioner åt dig, så det är väl det bästa att använda för TU's

Vad menar du med "Live spel"? XBLA? dom BÖR ligga på interna hårddisken, men kan likväl ligga på extern hårddisk i dom flesta fallen, DLC är det ända som verkligen MÅSTE ligga på interna hårddisken då spelen letar efter dom filerna där

Håll in Y knappen så startar den automatiskt FSD, du kan även göra en Quickboot länk till det alternativt lägga det som autostart i launch.ini (som du då lägger på hdd1, det ligger en i flash, du kan kopiera ut den men INTE skriva dit)


Liten info: Quickboot och Dashlaunch är inte i närheten samma sak, Dashlaunch har mycket fler funktioner än Quickboot, Quickboot är bara till för att göra länkar till program du kan ha i dashboarden

Ok, ehhh synd att jag inte hann läsa detta innan jag gjorde något . Jag "lycakdes" få installerat dashlaunch, dvs jag antar att jag har skrivit över den version som kommer förinstallerad. Finns det någon möjlighet att få er config, så den är rätt inställd? Freestyledash startar nu automatiskt(utan Y) så det är ju bra ... men antar att det är lite mer i konfig som kan vara bra att ha!

Tack för alla svaren, nu tror jag att jag börjar få koll på detta. Dags att sova .

[Swizzy]

Ok, ehhh synd att jag inte hann läsa detta innan jag gjorde något . Jag "lycakdes" få installerat dashlaunch, dvs jag antar att jag har skrivit över den version som kommer förinstallerad. Finns det någon möjlighet att få er config, så den är rätt inställd? Freestyledash startar nu automatiskt(utan Y) så det är ju bra ... men antar att det är lite mer i konfig som kan vara bra att ha!

Tack för alla svaren, nu tror jag att jag börjar få koll på detta. Dags att sova .

här är våran default konfigurations fil:

; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk    Hdd:\
; usb memory stick      Usb:\
; memory unit           Mu:\
; USB memory unit       UsbMu:\
; big block NAND mu     FlashMu:\
; CD/DVD                Dvd:\     (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex

; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A = 
BUT_B = Hdd:\Freestyle\default.xex
BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0DE99990F586558
BUT_Y = Hdd:\Freestyle2.0\default.xex
Start = 
Back  = 
LBump = 
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = 

; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide = 
; if you power on with the button on the front of the console, this item will be used instead of default
Power = 

; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 = 
plugin2 = 
plugin3 = 
plugin4 = 
plugin5 = 

[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true

; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = true

; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false

; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false

; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = true

; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false

; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false

; when regionspoof is true, you set your region here in hex, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF

; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false

; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false

; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false

; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false

; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true

; when set to true,  dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false

; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true

; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile = 

; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A

; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true

; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false

; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false

; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
hddalive = false

; in seconds, the interval between when USB devices will be polled for "alive.txt" file
hddtimer = 210

; attempts to disable popups related to signing in, like "live is blocked" and similar
; if not set this value will be TRUE
signnotice = true

; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false

; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false

; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true

; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = false
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030

; all comments and fields in this file are optional, you can remove anything you don't need - section headers []
; are required for any used options under the section

; sorry for any double negatives :p

; njoy, cOz

Det är samma som följer med xeBuild GUI

[Todilo]

här är våran default konfigurations fil:

; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk    Hdd:\
; usb memory stick      Usb:\
; memory unit           Mu:\
; USB memory unit       UsbMu:\
; big block NAND mu     FlashMu:\
; CD/DVD                Dvd:\     (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex

; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A = 
BUT_B = Hdd:\Freestyle\default.xex
BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0DE99990F586558
BUT_Y = Hdd:\Freestyle2.0\default.xex
Start = 
Back  = 
LBump = 
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = 

; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide = 
; if you power on with the button on the front of the console, this item will be used instead of default
Power = 

; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 = 
plugin2 = 
plugin3 = 
plugin4 = 
plugin5 = 

[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true

; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = true

; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false

; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false

; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = true

; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false

; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false

; when regionspoof is true, you set your region here in hex, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF

; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false

; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false

; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false

; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false

; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true

; when set to true,  dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false

; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true

; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile = 

; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A

; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true

; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false

; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false

; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
hddalive = false

; in seconds, the interval between when USB devices will be polled for "alive.txt" file
hddtimer = 210

; attempts to disable popups related to signing in, like "live is blocked" and similar
; if not set this value will be TRUE
signnotice = true

; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false

; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false

; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true

; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = false
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030

; all comments and fields in this file are optional, you can remove anything you don't need - section headers []
; are required for any used options under the section

; sorry for any double negatives :p

; njoy, cOz

Det är samma som följer med xeBuild GUI

Tack för hjälpen, funkar utmärkt. Inte hittat timingen för Y hammrandet så jag bara hamrar till jag kommer in .

[Swizzy]

Tack för hjälpen, funkar utmärkt. Inte hittat timingen för Y hammrandet så jag bara hamrar till jag kommer in .

Håll in den bara, det är lite timing när man startar konsollen, men när du ska ut från spel är det lättare, bara hålla in knappen direkt när du lämnar spelet